Specifications

List of the channel settings:

Channel Mode 1-16bit (default) Mode 2-16bit 8 bit

1 Pan Pan Pan

2 Tilt Fine Pan Tilt

3 Fine Pan Tilt Pan/Tilt speed

4 Fine Tilt Fine Tilt Fans,Lamp On/Off

5 Pan/Tilt speed Pan/Tilt speed Colours

6 Fans, On/Off lamp Fans, On/Off lamp Cyan

7 Colours Colours Magenta

8 Cyan Cyan Yellow

9 Magenta Magenta CMY speed

10 Yellow Yellow Colour macros

11 Speed of CMY Speed of CMY Effect wheel

12 Colour macros Colour macros No function

13 Effect wheel Effect wheel Strobe

14 No function No function Dimmer

15 Shutter, strobe Shutter, strobe

16 Dimmer Dimmer

Please refer to the chapter "DMX- protocol" for detail description.

Note: If you adjust the 16 bit resolution (Mode 1 or Mode 2), the fixture will occupy 16 DMX channels, if you

adjust the 8 bit resolution,the fixture will be operated by only 14 DMX channels.

Lamp presetting

This function allows you to adjust the lamp settings:

Lamp On after switching the fixture On

This function enables to turn the lamp on automatically after switching the fixture on. Use the [Up]

and [Down] buttons to select "On" if you wish to turn the lamp on automatically after switching the

fixture on or "Off" if you wish the lamp off after switching on the fixture and press [Enter] to

confirm or [Mode] to cancel and return to the menu.

Lamp Off via DMX

This function allows you to switch off the lamp by DMX. Use the [Up] and [Down] buttons to select

"On" if you want to switch off the lamp by DMX or "Off" if you don’t want to switch off the lamp by

DMX and press [Enter] to confirm or [Mode] to cancel and return to the menu.

Lamp On if DMX is present

This function allows you to strike the lamp automatically after 26 seconds if DMX signal is present

on the data link.If the ignition is unsuccessfull (e.g.lamp is too hot),the fixture will try to ignite the

lamp after next 26 s.This process will repeat until the lamp lights.Use the [Up] and [Down] buttons

to select "On" if you want to strike the lamp or "Off" if you don’t want to strike the lamp and press

[Enter] to confirm or [Mode] to cancel and return to the menu.