Specifications

13
[Mode] to return to the main menu. In order to reset the counter to 0, you have to hold the [Up] and [Down]-button
and press the [Enter]-button.
Power On time
By this option you can read the total number of hours that the BEAM 250 XT has been powered On. Press [Enter]
or [Mode] to return to the main menu.
Switch On/Off the lamp
Use the [Up] or [Down]-key to select "On" if you wish the switch On the lamp or "Off" if you wish switch Off the
lamp and press [Enter] to confirm or [Mode] to cancel and return to the main menu.
Test program
This function allows you to run a special test program without an external controller, which will show you some
possibilities of using BEAM 250 XT. Press the [Enter]-key to run the test program.
Reset Function
Press [Enter] key to run reset. This option enables the BEAM 250 XT to index all effects (functions) and return
to their standard positions.
8.2 SPEC -Special functions
Use the [Up] or [Down]-key to browse through the special functions and select the one by pressing [Enter].
Manual control of effects
This function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down] keys
to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the menu.