Specifications

29
t.M.Er.(Temperature measuring error)
The message informs you that the communication betwen the head and the main board in the xture base was
cut off (or the head temperature sensor is defective) and the lamp was automatically switched off.
13. Technical specications
Power supply:
EU-model-Voltage......................208/230/240V AC, 50/60Hz ~
-Fuse.........................T 3.15 A@230V
US-model-Voltage......................100/120/208/230 V AC, 50/60Hz ~
-Fuse.........................T 6.3 A@120V
-Power consumption....405 VA
Lamp:
Philips MSD 250/2,GY-9.5
Optical System:
- High luminous-efciency parabolic reector
- Front fresnel lens of diameter 158 mm
Colour wheel:
-6 replaceable 'SLOT&LOCK' dichroic lters (including 6000K and 3200K CTF and UV lter)
+ open
Effects:
-Beam shaper
-Frost lter for softer beam
Zoom
- zoom range: 8°-32°
CMY-colours mixing module
- Smooth CMY colour mixing system
- 30 colour macros
Strobe:
- Strobe effect with variable speed (max.15 ashes per second)
Dimmer:
- Smooth dimmer from 0 - 100 %
Motors:
- 10 high quality stepping-motors controlled by microprocessors
Electronics:
-Addressing,special functions setting,effects calibration via control panel with 4-digit LED
display
-Readout xture and lamp usage,receiving DMX values,temperature, etc
-Built-in analyzer for easy fault nding,error messages
-Remotely switching on/off the lamp
-Bilt-in demo sequences
-Black-out while head moving or color changing
-Silent fans cooling,
-Self-resetable thermo-fuse
-Master/slave operation
-Digital serial input DMX-512, RDM support
-4 control-channels presettings (18,16,20,18 control channels)
-Support RDM
Pan/Tilt
-Pan movement range 530°