Operating instructions

Telemetry-Box 2.4 GHz FASSTest

Toswitchtheuniton,themicro-switchonthebackofthe

unit must be moved up to the "ON" position.

When switched on, the screen displays the software versi-

on number and the actual Telemetry-Box voltage.

7. SWITCHING THE TELEMETRY-BOX ON 8. CHARGING THE TELEMETRY-BOX

The Telemetry-Box is ﬁtted with an internal 3.7 V / 500

mAh LiPo battery. The Telemetry-Box battery can be char-

ged from any PC or USB charger using the mini-USB lead.

If you wish to charge the Telemetry-Box "on the road", use

a USB adapter for your car's cigarette lighter; USB adap-

ters for domestic use are also available. Use only a USB

charger rated at 5 V / 1 A.

Note:

When the Telemetry-Box is connected to a PC, you may

see a window in which you are requested to install the soft-

ware driver for the Telemetry-Box. However, this driver is

only needed if you wish to update the software, i.e. you

can ignore this message if you only wish to charge the

Telemetry-Box.

Safety Note:

The Telemetry-Box switches itself off automatically when

the battery voltage falls to 3.3 V. If this should happen, you

must still switch the Telemetry-Box off using the switch on

thebackoftheunit.

Pleasecheckthebatteryvoltagebeforeeveryight.

On / Off switch