Operating instructions

Telemetry-Box 2.4 GHz FASSTest

6.Toinstallthenewsoftwareatthispoint,selectthe"Browse"eldandmarkthedesiredle.

Important note:

Ensure that you have also selected the correct ﬁle format; Firmware update = frm ﬁle /

Speech update = snd ﬁle. Installing the wrong ﬁle type could ruin the device.

The latest software updates can be found at http://www.robbe.de/telemetry-box-2-4-ghz-fasstestr.html.

Toinstallthesoftware,clickon"Download".Thefollowingdisplayappears:

Important note:

It is essential not to disconnect or switch off the device during the update procedure. In the worst case

this could ruin the device.

7. Close the ﬁeld once the installation is successfully completed.

8. After installation, switch the Telemetry-Box off and remove the USB lead. The new software can now be used.