Operating instructions

Telemetry-Box 2.4 GHz FASSTest
®
15
Explanation, "ERASE model" sub-menu
Whenyouopenthemenu,thescreendisplaylooks
likethis:
Now you can select one of the model memories using the
"+" or "-" buttons. To erase the memory, confirm with the
"ENT." button.
Press the "ESC." button to return to the main menu.
Note:
It is not possible to erase the current memory. If you wish
to erase it, first select a different model memory as the
active memory.
Explanation, "OPEN MODEL" sub-menu
Whenyouopenthemenu,thescreendisplaylooks
likethis:
Now you can select one of the model memories using the
"+" or "-" buttons. Press the "ENT." button to confirm your
choice.
14.5 MODEL SELECT MENU
Data for up to ten different models can be stored in the
"Model Select" menu; they can then be activated when you
wishtoythecorrespondingmodel.
Explanation, "Model Select" main menu
Three sub-menus can be selected from the main menu:
•Openmodel (selectmodelmemory)
•Newmodel  (createnewmodelmemory)
•Erasemodel (deletemodelmemory)
Use the "-" / "+" buttons or the "ENT." button to select a
sub-menu.
MODEL SELECT
>OPEN MODEL
NEW MODEL
ERASE MODEL
OPEN MODEL EDGE
>EDGE
ARCuS
ASW-28
Explanation, "NEW model" sub-menu
Whenyouopenthemenu,thescreendisplaylooks
likethis:
Now you can move the cursor over the letters and symbols
using the "-" button, then accept the desired character
with the "+" button. In this way you can set a name with
up to six characters. Press the "RNT." button to accept the
name. The name is now saved, and is displayed on the
screen at top right.
NEW MODEL EDGE
+,-./0123456789:
;(=)? ABCDEFGHIJ
kLMNOPQRSTuVWXYZ
-----------------------
MODEL NAME((+ ))
MODEL ERASE EDGE
>EDGE
ARCuS
ASW-28