Operating instructions

Telemetry-Box 2.4 GHz FASSTest
®
14
The following screen display now appears:
•Asinglepressonthe"ENT."buttonregisters
the sensor.
Erasing a sensor
This is the procedure for erasing a sensor:
•Movetothe"SensorRegister"menu.
•Usethe"-"or"+"buttontoselectthesensortobeerased,
and confirm your choice with the "ENT." button.
•Thefollowingscreendisplaynowappears:
•NowmovetheSelectarrowtothe
"ERASE SENSOR" FUNCTION.
•Holdthe"ENT."buttonpressedinforabouttwosecondsto
erase the
sensor.
Registering a sensor
•ConnectasensortotheS-BUS2,takingcaretomaintain
correct polarity (see illustration).
•Nowselectthe"SensorRegister"menu.Thefollowing
screen display now appears:
•Astartchannelmustnowbeselected.Usethe"="and
"ENT." buttons for this.
14.4 SENSOR REGISTER MENU
The "Sensor Register" menu is used to register new sen-
sors to the system, and to display sensors which are alrea-
dy registered.
Explanation, "Sensor Register" main menu
The main menu displays the channels which are in use by
one sensor type, in addition to the sensor name and the
start channel.
For example, two channels (altimeter and vario) are reser-
ved if a vario sensor is registered.
1 VARIO-F1712 1 2
2 **RESERVED**
3 VARIO-F1672 3 2
4 **RESERVED**
5 TEMP125-F1713 5 1
6 FREE
7 FREE
TYPE: VARIO
>NuMBER: 1
START SLOT NuM: 1
NuMBER OF SLOTS: 2
ERASE SENSOR
Sensor name
Start channel
Start channel
Channels in use
by sensor type
1 FREE
2 FREE
3 FREE
4 FREE
5 FREE
6 FREE
7 FREE
1 FREE
2 FREE
3 FREE
4 FREE
5 FREE
6 FREE
7 FREE
1 FREE
TYPE: VARIO
NuMBER: 1
START SLOT NuM: 1
NuMBER OF SLOTS: 2
>ERASE SENSOR
S.BUS 2