Instructions for use

• These motors are brushless motors
• Be sure to read the safety instructions carefully before opera-
ting your model.
• Always follow the procedures and settings recommended in
the instructions.
• If you are using remote-controlled model aircraft, helicopters,
cars or ships for the rst time, we recommend that you ask an
experienced model pilot for help.
• Remote-controlled models and their accessories are not toys
in the usual sense and may only be used and operated by
young people under 14 years of age under the supervision
of adults.
• Their construction and operation require technical understan-
ding, careful craftsmanship and safety-conscious behaviour.
• Mistakes or negligence during construction, ying or driving
can result in considerable damage to property or personal
injury.
• Since the manufacturer and seller have no inuence on the
proper construction/assembly and operation of the models
and their accessories, these risks are expressly pointed out
The Robbe Ro-Power Torque motors are precisely manufactu-
red brushless motors for RC applications. Only selected, high-
quality materials and seminished products are used. Manufac-
turing is carried out to precise specications and standards to
provide you with a durable, powerful drive for your model.
We recommend that you use Robbe Ro-Control regulators
(esc´s) to achieve the highest possible level of efciency. Ho-
wever, it is also possible to use the motors with controllers from
other manufacturers. When adjusting the correct propeller you
should monitor the current as well as the temperature. Always
ensure sufcient cooling.
The propeller and motor mounting must be checked conscien-
tiously and regularly for tightness. The drive recommendations
are only guide values and may vary in practice depending on
the model and model type.
We wish you many trouble-free operating hours with our Ro-Po-
wer Torque motors!
and any liability is excluded.
• Propellers on aircraft and all moving parts in general pose a
constant risk of injury. Avoid touching such parts at all costs.
• Note that motors and controllers can reach high temperatu-
res during operation. Avoid touching such parts at all costs.
• Never stay in the danger area of rotating parts with electric
motors with connected drive battery.
• Only the components and accessories recommended by us
may be used.
• Check the engine mounting bolts in the fuselage regularly for
tightness.
• Never exceed the maximum permissible speed of the propel-
lers used or of the motor!
• This can lead to serious injuries, e.g. from ying parts!
• The motors may only be used for model making usual appli-
cations.
• Never use damaged motors, propellers, spinners etc.!
• Only suitable speed controllers may be used in connection
with model accumulators.
• (no power supplies, or other voltage sources such as 230V AC
alternate current)
• Make sure that the xing screws used do not protrude into
the motor housing. Otherwise the motor can be permanently
damaged!
• Most motors are designed for front or rear mounting. Make
sure that all screws are tight and check all screw connections
regularly.
• Make sure that the motor does not overheat due to sufcient
cooling. Temperatures above 60°C can damage the motor.
• Never operate the motor without a load, as this may damage
the motor due to excessive speed.
Modellsport
ENGLISH
P R E FA C E
S A F E T Y I N F O R M AT I O N
WA R R A N T Y
C O N F O R M I T Y
D I S P O S A L
D I S C L A I M E R
Our articles are equipped with the legally required 24 months
warranty. Should you wish to assert a justied warranty claim,
always contact your dealer, who is responsible for the warranty
and the processing. During this time, any functional defects
that may occur, as well as manufacturing or other problems,
will be rectied. Material defects corrected by us free of
charge. Further claims, e.g. for consequential damages, are ex-
cluded. The transport to us must be free, the return transport to
you is also free. Freight collect shipments cannot be accepted.
We cannot accept liability for transport damage and loss of
your consignment. We recommend appropriate insurance.
Robbe Modellsport hereby declares that this
device complies with the essential require-
ments and other relevant regulations of the
corresponding CE directives. The original
declaration of conformity can be found on the
Internet at www.robbe.com, in the detailed
product view of the respective device description or on re-
quest. This product can be operated in all EU countries.
This symbol means that small electrical and
electronic devices must be disposed of at the
end of their useful life, separated from the house-
hold refuse. Dispose of the device at your local
municipal collection point or recycling centre.
This applies to all countries of the European Union
and other European countries with a separate
collection system.
Robbe Modellsport cannot monitor compliance with the
assembly and operating instructions or the conditions and met-
hods for installation, operation, use and maintenance of the
model components.Therefore, we accept no liability for losses,
damage or costs arising from or in any way connected with in-
correct use and operation.To the extent permitted by law, the
obligation to pay damages, irrespective of the legal grounds,
shall be limited directly to the invoice value of the claims arising
from the event causing the damage.
To process your warranty claims, the following requirements
must be met:
• Attach the proof of purchase (receipt) to your shipment.
• The units have been operated in accordance with the
operating instructions.
• Only recommended power sources and original robbe
accessories have been used.
• There is no moisture damage, external interference, reverse
polarity, overloading or mechanical damage.
• Attach relevant information for nding the fault or defect.