Instructions for use

ENGLISH
16
INSTRUCTIONS AND USER MANUAL
1. ASSEMBLY OF THE TAILPLANE:
Position the tailplane as shown in the
illustration at the fuselage end and screw
it tightly to the fuselage from above using
the M4x25 screw. Make sure that the screw
is rmly seated and do not overtighten the
screw!
PNP
Motor Brushless 2820 1.000KV (included)
ESC Brushless 30A 2-3S Lipo , 5V/2A BEC (included)
Battery Lipo approx. 2200 mAh 3S/11,1 Volt (not included)
Servo ELE 1x 9g (included)
Servo RUD 1x 9g (included)
Servo AILE 2x 9g (included)
Propeller 10x8“ (included)
Charger suitable Lipo charger (not included)
TX min. 4 channels (not included)
RX min. 4 channels (not included)
SPARE PARTS
Spare Part item Number
301403 Wingset with decals (w/o Servos)
301404 Fuselage with decals (w/o electronic)
301405 Tail unit set
301406 Canopy
301407 Prop blades
301408 Foldingprop set
301409 Pushrod set
301410 Winglets
301411 Decals
301412 Brushless Motor 2820
8713 Brushless controller ro-Control 40A
S0009 Rovor S0009 9g servo
BOX CONTENT / NEEDED ACCESSORIES