Instructions for use
ENGLISH
15
INSTRUCTIONS AND USER MANUAL
Modellsport
21
22
23
24
21
22
23
24
ARF
Glue the servo covers with UHU POR. So the covers
can be easily removed again later.
ARF PNP
In the last step, mark the center of gravity on the underside of the wing and move the batte-
ry until the center of gravity meets our specications.
ARF PNP
Screw the fuselage and wing by the enclosed M4 screw.
ARF PNP
Due to the high propeller speed, only the propellers made of carbon by RASA are recom-
mended by us may be used. For other products, there is a risk of the propellers tearing off.
Now look for a day with suitable weather conditions for the rst ight. With the mentioned
settings you will be spared bad surprises. We recommend, at least on the rst ight, to make
the start with a starting helper.
CONTROL THROWS
Function Normal Speed Thermal Landing
Elevator +3 mm / -3 mm; 15% Expo
Rudder /
Ailerons +10 mm / -8 mm; 25% Expo
Flaps +13mm, and ELEV -1mm
ENDING
Now look for a day with suitable weather conditions for the rst ight. With the mentioned settings you will be spared bad surprises. We recommend, at least on the rst ight, to make the start with a starting
helper. Enjoy your new model aircraft and „always happy landings!“.
WING
SPARE PARTS
Spare Part item Number
Fuselage (w/o electronics) 263501
Wing Set (without Servos) 263502
Elevator 263503
Protection Bag Rat 263504
Servo FS-166 BB MG 9105
Motor ro-Power Torque X36-1000 5805
Rasa CFK Folding Prop 9x7“ /
Turbo Spinner 38mm 20736