Use and Care Guide

User Manual
Switch control panel
Lighting Airflow control strip Power
When the power is on, press the power button to wait, and the fan can be turned
on at this time. When the fan is working, press the power button, it will flash, the
hood enters the delayed working state, and the hood is turned off after 1 minute.
When the power button is flashing, press the power button again to turn off the
hood directly.
Press the button, the light is on, then press the button to turn off the light.
After the power button is turned on, slide the airflow control strip and the fan starts
working. According to the length of the airflow control strip, the user can select the
appropriate gear position according to the needs.
When the power is turned on, the buzzer sounds and the power is turned on.
Power
Airflow control strip
Lighting
35
11
bottom of the mesh enclosure and power it for trial operation.
. After installation, the whole machine must be kept horizontal. In the end, insert the oil cup into the hitching leg on the
Maintenance
Warning
1.There is a fire risk if cleaning is not carried out in accordance with the instructions.
2.Cleaning and maintenance shall be conducted under outage. Electrical components such as motor, switch, and
connector shall not be spoiled by water so as to prevent from accidents.
3.It's prohibited to wash with water so as to prevent accidents.
4.Stove fire shall be extinguished timely when it is not used; do not flambe under the range hood and it's
prohibited to bake food under range hood directly to prevent range hood from damaging and causing accidents.
5.If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
6.Accessible parts may become hot when used with cooking appliances.
Range Hood