Use and Care Guide

6. Make holes on the cabinet floor according to the size shown in the illustration。
12
14
16
1
0
17”(430mm)
3
11- /8”
(290mm)
12
1
4
16
10
33
Range Hood
3 3 5
4. 2- /8-2- /4”(60-70mm) /16”(8mm)
the expansion pipe into the hole, and reliably fix the hitching leg with 4×60mm wood screws supplied with the machine.
Use a level ruler to make sure the hitching leg is in a horizontal position.
Drill a hole deep (not too large) at the mark with a drill bit with a diameter of , press
5. Drill a hole with a diameter of (not too large) and a depth of at the fixing hole mark of
the hitching leg stop block, and insert the M6 metal expansion pipe into the hole.
3 3
/8”(10mm) 2-2- /16”(50-55mm)
2- ”
(55mm)
3
/16 2
(55mm)
3
- /16”4- ”
(110mm)
5
/16
2- ”
(62±2mm)
7
/16
3
/8”(10mm)
9 9
25- /16-29- /16”
(650-750mm)
20- ”
(520mm)
1
/2
1 7
31- /2-35- /16”
(800-900mm)