Use and Care Guide

Installation

●Surrounding

Keep the hood away from too many doors and windows, so as to avoid air convection affecting the efficiency.

●Tools preparation

The hood will be installed with the following tools

Preparation for installation

Warning

1.The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels,

the discharge of air must fulfill the requirements of local regulations.

2.Note that when installing the metal expansion pipe, the pipe shall match with the hole in size. Overlarge hole is

prohibited, as it will result in loose pipe and accidental drops.

3.There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas

or other fuels.

4.If the flue aperture is less than air duct aperture, it will influence the fume suction effect and the too long air duct will

influence the fume suction effect, too.

5.This appliance just for household use only.And it’s not allowed to exhaust dangerous or explosive matter or air. It should

be put under dry and ventilation environment without dangerous air.

Electric percussion

drill

Electric screwdriver

Wrench

Measuring tape

Gloves

Cross screwdriver

Hammer

Scissors

Pencil

Ruler

Level meter

Beam detector

Goggles

Cutting pliers Art knife

Range Hood