User Manual Wind Up 100-4 Lighting Stand
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 30.06.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
General information 1 General information This manual contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the product. If you sell the unit, please make sure that the buyer also receives this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This light stand is intended to be used for the stable mounting and height-adjustable posi‐ tioning of spotlights. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions CAUTION! Danger of tipping on unsuitable surfaces When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid surfaces. CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property damage. Never exceed the maximum load capacity specified for the stand.
Features 3 Features Special characteristics: n n n n n n n 10 Wind Up 100-4 Lighting Stand Crank tripod with four feet for more stability Two telescopes, extendable by means of a crank 3/8" mount (suitable for holding speakers with a 35 mm flange) Maximum weight-bearing capacity: 110 kg Maximum height: 4.13 m Cross beam included in delivery optional truss adapter: Item no.
Operating 4 Operating Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Operating CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property damage. Never exceed the maximum load capacity specified for the stand. NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suit‐ able underlay if necessary, i.e.
Operating Setup * & B % ( ' $ ö A , ) + # 1. Loosen the safety screw [1] on the lower slide and unfold the tripod feet [2] until the safety bolt [10] engages in the desired position in the main tube [3]. 2. Fix the position with the safety screw [1] on the lower slide to which the four cross beams are attached.
Operating 14 Wind Up 100-4 Lighting Stand 3. Flange the cross beam onto the mount for the cross beam at the tripod top end [9] and tighten the securing screw of the mount. Attach the spotlights. Pay attention to an even weight distribution to reach a centric load of the stand. The maximum load capacity of 110 kg in total must not be exceeded. 4. Loosen the locking screw [4] on the tube clamp of the square tube [7]. 5.
Operating Dismounting 1. Pull out the spring split pin [A] of the safety bolt [11] and fold the fixing [B] at the max‐ imum angle in the opposite direction to pull the safety bolt out of the square tube [7]. 2. Loosen the safety screw [6] on the tube clamp of the main tube [3] and crank the square tube [7] all the way down with the crank [8]. Fix the position of the square tube with the safety screw [6]. 3.
Technical specifications 5 Technical specifications Height, max. 4.13 m Holder type 3/8" mount; flange, Æ 35 mm Tripod space, max. 2.13 m Load, max. (with centric load) 110 kg Transport size 1.95 m Weight 28.
EU declaration of conformity 6 EU declaration of conformity Name and address of manufacturer / EU-AR Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany THIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE SOLE RESPONSIBILITY OF: Name and address of manufacturer Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Product identification 504973 Roadworx Win Up 100-4 THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN CONFORMITY WITH: EU Community Legislation Machinery Directive 2006/42/E
EU declaration of conformity SIGNED FOR AND ON BEHALF OF: Place and date of issue 18 Wind Up 100-4 Lighting Stand Burgebrach, 18 November 2021
Protecting the environment 7 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 20 Wind Up 100-4 Lighting Stand
Notes Wind Up 100-4 Lighting Stand 21
Notes 22 Wind Up 100-4 Lighting Stand
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
