Assembly instructions

Table Of Contents

TM-X VESA Mount for Bar (item no. 542189, 542190)

Remove the rubber plugs and slide the arm in the holder. Place the rubber plugs in the recesses of the arm.

Loosen the locking screw of the monitor holder and place the monitor holder in the recess of the arm. Tighten the locking screw.

For adjusting the monitor holder tilt, loosen the Allen screws using an Allen key. Adjust the desired tilt and tighten the Allen screws

using an Allen key.

Mount the monitor with four screws and washers to the monitor holder.

Installation

TM-X

Desktop Stand