Assembly instructions

TM-X Studio Monitor Holder (item no. 540270)
Loosen the locking screw of the speaker holder and slide him on the arm. Tighten the locking screw.
Slide the arm with the speaker holder from above in the recess of the desktop stand TM-X Pole Clamp (item no. 540259, 540264,
540262) or TM-X Pole Fixed (item no. 540261, 540265, 540263). Adjust the desired height of the arm and tighten the Allen screws
using an Allen key.
For adjusting the speaker holder tilt, loosen the Allen screws using an Allen key. Adjust the desired tilt and tighten the Allen screws
using an Allen key.
Installation
16
TM-X
Desktop Stand