Assembly instructions

TM-X Tablet Holder (item no. 540268)
Loosen the locking screw and place the tablet holder in the recess of the TM-X Arm (item no. 540250, 540252, 540254). Tighten the
locking screw.
Loosen the locking screw of the mounting hole and adjust the tilt of the tablet holder up to 90°. Tighten the locking screw.
Loosen the locking screws of the supporting arms, pull out the supporting arms completely and place the tablet in the corner sup‐
ports of the lower supporting arms.
Adjust the corner supports to the thickness of the tablet. Make sure that the tablet sits rmly in the corner supports. Tighten the
locking screws of the corner supports.
Reinsert the supporting arms and x the tablet. Tighten the locking screws of the supporting arms.
Installation
TM-X
13
Desktop Stand