Operation Manual

8
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
• Select the desired memory station and page by pressing the corresponding key until its number
goes solid above ‘MEM’
• Press <MEM> again to confirm the process of storing. Then, ‘MEM’ goes solid.
• When ‘MEMORY’ is flashing, pressing <Up> or < Down> will start turning and exit memory store
• Press other key to start its corresponding function.
When Radio is OFF, same operation for cooking timer memories store.
3.4.5 Search Up/Down:
• When the radio is ON, press <UP> once to change the receiving frequency up by 1 step
• Press <DOWN> once to change the receiving frequency down by 1 step.
• Press and hold <UP> to search the next radio station by moving the receiving frequency up.
• Press and hold <DOWN> to search the next radio station by moving the receiving frequency down.
•
3.4.6 Using of A.M.S. (Auto Memory Store)
• When radio is on.
• Press and hold < MEM> for 3 seconds to active AMS mode.
• In this mode, the radio will automatically scan the radio station and store the station that had been
scanned until scan up all the frequency or stored all the memory station, it will exit automatically.
When AMS function active, the stored memories will replace by the new scanned radio station.
3.5 Using CD/MP3:
3.5.1 start the CD/MP3
• Press <Power> once to turn on the unit
• Press <FUNC/User> key to select CD/MP3
• Press <Power> again to turn off the unit
•
3.5.2 Using CD/MP3 Player
• Press <Open> to open tray of CD and put CD media to tray, press “Open/Close” key again to close
door of CD tray, at the moment , device will catch data from CD and “Reading, Please wait “
for about 5-10 seconds
• Once the CD read and confirm it’s workable format, device will play from beginning of play list if not
any key press.
• Press “Play/pause” to play of Pause under music play back
• Press “Prog./Mem” to select play back mode as intro ,random or repeat
• Press and hold “UP | FF” to fast speed forward, press once to next track
• Press and hold “ Down | RW” to Fast speed rewind , press once back to previously track.
•
3.5.3 Program play
• Press <Prog> once to program mode when stop mode.
• Press <UP> or <DOWN> to select tack for first of program list.
• Press <Prog> again to select tack for next. Up to 64
• Press <play> to
confirm the setting and
play .
• Press <stop> twice to cancel program play
3.6 Using USB:
3.6.1 Start the USB
• Press <Power> once to turn on the unit
• Press <FUNC/User> key to select USB
• Press <Power> again to turn off the unit.
•
3.6.2 Using USB Player
• Insert USB-Disk into UBS jack, device will reading .
• The device seek complete ,device will play from beginning of play list if not any key press.
• Press “Play/pause” to play of Pause under music play back
• Press “Prog./Mem” to select play back mode as intro ,random or repeat
• Press and hold “UP | FF” to fast speed forward, press once to next track
• Press and hold “ Down | RW” to Fast speed rewind , press once back to previously track.