Operation Manual

5
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
2.1.9 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode
2.2 How to set the date:
2.2.1 Press <Mode|Stop > twice in clock setting mode
2.2.2 The current date goes flashing in the format of dd. mm. yy
2.2.3 Press <UP> or <Down> to change the current setting by 1 day per step. Press and hold <UP> or
<Down> to change the setting in fast mode of 10 days per step. The day flag will be updated
automatically when the date has become steady.
2.2.4 Press <Mode|Stop > once to confirm the current setting and it switches to set the SDA.
2.2.5 Press other key to start its corresponding function.
2.2.6 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run automatically.
2.2.7
2.3 How to set the SDA (Special Date Alert):
2.3.1 Press <Mode> triple times when the unit stays in “SDA” mode
2.3.2 The DATE & ‘SDA 1’ goes flashing alternative
2.3.3 Press <MEM Scan> to select 1-6 SDA which want to set
2.3.4 Press <Up> or <Down> to set the Special Date.
2.3.5 Press <MEM>to enter SDA hour select mode
2.3.6 Press <Up> or <Down> to set the hour
2.3.7 Press <Timer> to ignore the year
2.3.8 Press <Mode|stop > once the current setting is confirmed and switches to Setting update mode
2.3.9 Press other key to start its corresponding function.
2.3.10 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
In case of ignore the year the SDA will be active ever year at same date
2.4 Update setting mode:
2.4.1 Press <Mode|Stop > for 4 times into update made selection, press “Down” tune off update function ,
RDS automatic update function will be shut off and “RDS” mark disappear.
2.4.2 Press <UP> once to select “UP DATE ON “, RDS automatic update function becomes active and the
“RDS” mark appear.
2.4.3 Press <Mode|Stop > once to confirm the current setting and it switches to Set dimmer
2.4.4 Press other key to start its corresponding function.
2.4.5 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.5 How to set the dimmer:
2.5.1 Press <Mode|Stop > for 5 times into dimmer switch mode,
2.5.2 press “Down” or “UP” tune off or tune on dimmer function
Key Press Display Function
Down DIM OFF Dimmer Off
Up DIM ON Dimmer On
2.5.3 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.6 How to set Automatic Dimmer / Timer:
2.6.1 Press <Mode|Stop > for 6 times into setup of dimmer timer switch mode, press “Down” or “UP” tune
off or tune on dimmer function
2.6.2 When the timer switch on, back light will automatically dim from 23:00 ~ 05:59, press any key could
be brighter for 60 second.
Key Press Display Function
Down
DT OFF
Dimmer Timer off
Up
DT ON
Dimmer Timer on