Instruction manual

This function is effective only when the device is connected to the
HDMI OUT MAIN terminal.
Setting to "On" and closing the on-screen menu displays the name
of the CEC-compatible components and "RIHD On" on the display.
Power consumption in standby mode may increase if "On" is set.
(Depending on the TV status, the unit will enter the normal standby
mode.)
If you operate the MASTER VOLUME control of the unit when this
setting is set to "On" and you are listening to the audio through the
speakers of your TV, audio will be output also from the speakers
connected to the unit. If you want to output from only either of them,
change the unit or TV settings, or reduce the volume of the unit.
If abnormal operation occurs when you set the setting to "On", set it
to "Off".
When connecting a non-CEC compatible component, or when you
are not sure whether it is compatible, set the setting to "Off".
When changing this setting, turn off and then on again the power of
all connected components.
Control Monitor
Default Value: MAIN
Select the main room monitor or the separate room monitor for which
the CEC link function is enabled when Zone function is used.
"MAIN": The CEC link function is enabled for the monitor in the main
room.
"ZONE2": The CEC link function is enabled for the monitor in Zone 2.
"MAIN" cannot be selected when " Monitor Out " is set to "SUB".
"ZONE2" can be selected only when "Zone 2 Monitor Out" is set to
"Use".
When "ZONE2" is selected in "Control Monitor", the power
consumption increases even when the unit is on standby. However,
the increase in power consumption is kept to a minimum by
automatically entering the HYBRID STANDBY mode, where only the
essential circuit is operating.
HDMI Through
Default Value: Off
You can display the video of an HDMI connected player on the TV even
if the unit is in standby mode. This setting is effective only for an input
selector to which an HDMI jack is assigned in "HDMI Input". It cannot
be set to any other input selector unless an HDMI jack is assigned to it.
"Off": The setting is disabled. Video of device connected to any jack will
not be displayed.