Instruction manual

desired level.
Wide Right
Default Value: 0.0dB
Select a value between "-12.0dB" to "+12.0dB". (in 0.5dB increments) A
test tone will be output each time you change the value. Select the
desired level.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes".
Front Right
Default Value: 0.0dB
Select a value between "-12.0dB" to "+12.0dB". (in 0.5dB increments) A
test tone will be output each time you change the value. Select the
desired level.
Surround Right
Default Value: 0.0dB
Select a value between "-12.0dB" to "+12.0dB". (in 0.5dB increments) A
test tone will be output each time you change the value. Select the
desired level.
Back Right
Default Value: 0.0dB
Select a value between "-12.0dB" to "+12.0dB". (in 0.5dB increments) A
test tone will be output each time you change the value. Select the
desired level.
The setting is not displayed if "Speaker Configuration" - "Back" is set
to other than "None" and also "Back ch" is set to other than "1ch".
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 3" is set to "Yes" and also
Zone 2 and Zone 3 are set to on.
– "Speaker Settings" - "Front Speakers Type" is set to "Normal",
"Powered Zone 2" is set to "Yes" and also Zone 2 is set to on.
Back Left
Default Value: 0.0dB