Instruction manual

Back Right
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
The setting is not displayed if "Speaker Configuration" - "Back" is set
to other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 3" is set to "Yes" and also
Zone 2 and Zone 3 are set to on.
– "Speaker Settings" - "Front Speakers Type" is set to "Normal",
"Powered Zone 2" is set to "Yes" and also Zone 2 is set to on.
Back Left
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
The setting is not displayed if "Speaker Configuration" - "Back" is set
to other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 3" is set to "Yes" and also
Zone 2 and Zone 3 are set to on.
– "Speaker Settings" - "Front Speakers Type" is set to "Normal",
"Powered Zone 2" is set to "Yes" and also Zone 2 is set to on.
Back
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
The setting is not displayed only if "Speaker Configuration" - "Back"
is set to other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 3" is set to "Yes" and also
Zone 2 and Zone 3 are set to on.
– "Speaker Settings" - "Front Speakers Type" is set to "Normal",
"Powered Zone 2" is set to "Yes" and also Zone 2 is set to on.
Surround Left
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.