Instruction manual

"Full Band" can be selected only when "Front" is set to "Full Band".
Surround
Default Value: 80Hz(THX)
Select the crossover frequency from "40Hz" to "200Hz" to start
outputting frequencies for each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
"Full Band" can be selected only when "Front" is set to "Full Band".
"None" can be selected only when "Speaker Settings" - "Height 1
Speakers Type" or "Height 2 Speakers Type" is set to "Not Use".
Back
Default Value: 80Hz(THX)
Select the crossover frequency from "40Hz" to "200Hz" to start
outputting frequencies for each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
In any of the following cases, this setting will be set to "None".
– "Surround" is set to "None".
– "Speaker Settings" - "Powered Zone 3" is set to "Yes" and also
Zone 2 and Zone 3 are set to on.
– "Speaker Settings" - "Front Speakers Type" is set to "Normal",
"Powered Zone 2" is set to "Yes" and also Zone 2 is set to on.
"Full Band" can be selected only when "Surround" is set to "Full
Band".
Back ch
Default Value: 2ch
Select the number of channels of the connected surround back
speaker.
"1ch": When one speaker is connected (Connect to the BACK L
terminal)
"2ch": When two speakers are connected
The setting cannot be changed if "Back" is set to "None".
Wide
Default Value: None
Select the crossover frequency from "40Hz" to "200Hz" to start
outputting frequencies for each channel.