Instruction manual

"Dolby Enabled Speaker (Surround)" cannot be set when "Surround"
is set to "None".
"Dolby Enabled Speaker (Back)" cannot be set when "Back" is set to
"None" or "Back ch" is set to "1ch".
Height 2 Speakers Type
Default Value: Not Use
Set the type of speakers connected to HEIGHT 2 speaker terminals.
Selectable options vary depending on the setting for "Front Speakers
Type". Select from the following options according to the type and
layout of the connected speakers and the setting for "Front Speakers
Type".
If "Front Speakers Type" is set to "Normal": Select "Not Use", "Top
Middle", "Top Rear", "Rear High", "Dolby Enabled Speaker (Surround)",
or "Dolby Enabled Speaker (Back)".
If "Front Speakers Type" is set to "Bi-Amp": Select "Not Use", "Front
High", "Top Front", "Top Middle", "Dolby Enabled Speaker (Front)",
"Dolby Enabled Speaker (Surround)", or "Dolby Enabled Speaker
(Back)".
In any of the following cases, this setting will be set to "Not Use".
– "Front Speakers Type" is set to "Normal" and also "Height 1
Speakers Type" is set to "Not Use".
– "Height 1 Speakers Type" is set to "Top Middle", "Dolby Enabled
Speaker (Surround)" or "Dolby Enabled Speaker (Back)".
"Dolby Enabled Speaker (Surround)" cannot be set when "Surround"
is set to "None".
"Dolby Enabled Speaker (Back)" cannot be set when "Back" is set to
"None" or "Back ch" is set to "1ch".
Powered Zone 2
Default Value: No
Set presence of speaker terminal connection of Zone 2.
"Yes": When speakers are connected to ZONE 2 speaker terminals
"No": When speakers are not connected to ZONE 2 speaker terminals
If "Height 2 Speakers Type" is set to other than "Not Use", this item
will be set to "No".
Powered Zone 3
Default Value: No
Set the connection of speakers to Zone 3 speaker terminals.
"Yes": When speakers are connected to Zone 3 speaker terminals