Instruction manual

TV/CD
Default Value: -----
"COMPONENT 1", "COMPONENT 2": COMPONENT VIDEO IN jack is
assigned to TV/CD button.
PHONO
Default Value: -----
"COMPONENT 1", "COMPONENT 2": COMPONENT VIDEO IN jack is
assigned to PHONO button.
When "Monitor Out" is set to "MAIN" or "MAIN+SUB" and "Resolution" is
set to "Through", the 480i/576i component signals will be output with their
resolution unchanged. So, TV sets not supporting these resolutions will
not be able to display video.
Composite Video Input
It is possible to change assignment of input selector buttons and the
COMPOSITE VIDEO IN V1 to 3 jacks.
BD/DVD
Default Value: -----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to BD/DVD button. If you do not assign a jack, select "-----
".
CBL/SAT
Default Value: VIDEO 1
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to CBL/SAT button. If you do not assign a jack, select "-----
".
STB/DVR
Default Value: VIDEO 2
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to STB/DVR button. If you do not assign a jack, select "-----
".