Instruction manual

Updating the Firmware via Network
Before Start:
Check that the unit is turned on, and the connection to the Internet is
secured.
Turn off the controller component (PC etc.) connected to the network.
Stop any playing Internet radio, USB storage device, or server content.
If the multi-zone function is active, press OFF on the main unit to turn it
off.
If "HDMI CEC (RIHD)" is set to "On", set it to "Off" (default value).
– After pressing RECEIVER, press HOME on the remote controller.
Select "Setup" with the cursors and press ENTER. Then, after
selecting "7. Hardware Setup" - "HDMI" and pressing ENTER, select
"HDMI CEC (RIHD)" to select "Off".
＊ The description may differ from the on-screen display but that will not
change the way to operate or the function.
Update
1. Press RECEIVER and then press HOME on the remote controller.
The HOME menu is displayed on the TV screen.
Firmware Update