Instruction manual

You can enable the control functions between the unit and external devices
using the terminals below. Special devices or cable connections are
necessary to enable the functions. For more information about preparation,
contact the specialized stores.
RS232 port
Use the port for connection with a integrated control system that can enable
home automation. Some integrated control systems provide a centralized
operation with a single touch panel controller in order to control audio and
video home appliances and security devices together. For more information
about adopting an integrated control system, contact the specialized stores.
IR jack
If you use a multiroom remote control kit such as commercially available
Xantech and Niles with this jack, you can operate the unit with the remote
controller even when you are in a separate room, or operate the unit with the
remote controller even if its remote control sensor is difficult to see. For more
information about adopting a multiroom remote control kit, contact the
specialized stores.
12V trigger output jack
You can enable power link operation when you connect the unit and an
external device such as power amplifier equipped with 12V trigger input jack.
When the Zone 2 or Zone 3 function of the unit is turned on, the power link
operation will be activated with a control signal output from the 12V trigger
Control Function between the Unit and External
Component