Instruction manual

Bi-Amping
It is possible to connect speakers supporting bi-amping to improve quality of
the bass and treble. Up to 9.2 ch will be played in bi-amping.
Connections
1. Connect as below using the FRONT terminals and HEIGHT 1 (Bi-AMP)
terminals.
2. Turn the unit on and make the bi-amping setting.
1 After pressing RECEIVER, press HOME on the remote controller.
2 Select "Setup" with the cursors and press ENTER.
3 With the cursors, select "2. Speaker Setup" - "Speaker Settings" -
"Front Speakers Type".
4 Select "Bi-Amp" with the cursors.
Before bi-amping, be sure to remove the short-circuit connector
that connects the tweeter (treble) terminal and the woofer (bass)
terminal.
Use speakers supporting bi-amping only. For details, refer to the
speakers' instruction manual.
Advanced Speaker Connection