Instruction manual

Assigning an Operation Sequence to the Remote
Controller (Macro Function)
An operation sequence that normally requires several steps of pressing
buttons can be performed automatically by simply pressing the ACTIVITIES
button (MY MOVIE, MY TV or MY MUSIC).
Using an ACTIVITIES button with preset operation
The following buttons have a preset operation as below. Pressing the
desired ACTIVITIES button (MY MOVIE, MY TV or MY MUSIC) will execute
the operation.
MY MOVIE: The power of the TV, the player programmed to BD/DVD, and
the unit is turned on. The input is switched to "BD/DVD" and playing starts.
Playing may not start depending on the start-up time of the player. In that
case, press on the remote controller.
MY TV: The power of the TV, the player programmed to CBL/SAT, and the
unit is turned on. The input is switched to "CBL/SAT".
MY MUSIC: The power of the player programmed to TV/CD and the unit is
turned on. The input is switched to "TV/CD" and playing starts.
To use another ACTIVITIES button after pressing an ACTIVITIES button,
press ALL OFF and then press the desired ACTIVITIES button.
To turn off all the devices programmed to the ACTIVITIES button: Press
ALL OFF. The player, the unit and the TV programmed to the ACTIVITIES
button you pressed before pressing ALL OFF will turn off (or enter standby).
Operating Other Components with the Remote
Controller