Instruction manual

"Off": Automatic correction will be disabled.
InstaPrevue
Sub Window
Default Value: Multi
Change the preview display of the video input through HDMI, which will
be displayed using "InstaPrevue" in the HOME menu.
Set how to display preview thumbnails.
"Multi": Displays all the thumbnails of HDMI IN 1, 2, 3, 4 and Front at
once.
"Single": Displays each thumbnail individually.
Depending on the video source, the preview thumbnails configured
in "InstaPrevue" may not be displayed properly.
InstaPrevue
Position
Default Value: Bottom/Lower Right
Change the preview display of the video input through HDMI, which will
be displayed using "InstaPrevue" in the HOME menu.
Set the position to display preview thumbnails.
When "Multi" is selected for "Sub Window": Select from "Top", "Bottom",
"Left" and "Right".
When "Single" is selected for "Sub Window": Select from "Upper Left",
"Upper Right", "Lower Left" and "Lower Right".
Depending on the video source, the preview thumbnails configured
in "InstaPrevue" may not be displayed properly.
Auto Standby
Auto Standby
Default Value: On/Off
This setting places the unit on standby automatically after 20 minutes of
inactivity without any video or audio input.
"On": The unit will automatically enter standby mode ("ASb" will stay lit).
"Off": The unit will not automatically enter standby mode.
"Auto Standby" is appeared on the display and menu screen 30
seconds before the Auto Standby comes on.
"Auto Standby" does not work when Zone 2/Zone 3 is active.
Default values vary depending on the regions.