VRVD630 In-Dash AM/FM Stereo with Built-in 3” LCD monitor DVD/CD/VCD/DIVX/MPEG4/MP3/WMA/CD-R/CD-RW Player with USB, SD Card and Video/Audio Auxiliary Input 2
Welcome! Dear Customer, CONGRATULATIONS. The VRVD630 Multi-Media Headunit with AM/FM Stereo Receiver, DVD, VCD, CD, and MP3 Player, Auxiliary Input Jack, SD Card & USB Memory capability and Detachable Faceplate, when used as described, will give you years of dependable service in your car, truck, RV, or mini-van. We have taken numerous measures in quality control to ensure that your product arrives in top condition and will perform to your satisfaction.
PRECAUTIONS Driving a vehicle while viewing a video on this head unit may violate motor vehicle laws, and may result in serious injury, property damage, or death! • The unit is only designed for use with 4 speakers. Do not combine speaker output wires for use with 2 speakers. Do not ground negative speaker leads to the chassis ground. Please read these important precautions BEFORE attempting to install this unit. • Disconnect the vehicle’s negative battery terminal before starting installation.
Disc & Memory Types The following table contains information on the different functions performed, and the different types of media used by this unit. Disc Type Icon Content Size Playtime DVD Audio/Video 12cm About 2 - 4.
Before You Install Automotive audio equipment installations can be challenging at times, even to the most L_WLYPLUJLK VM PUZ[HSSH[PVU [LJOUPJPHUZ 0M `V\ HYL UV[ JVUÄKLU[ ^VYRPUN ^P[O LSLJ[YPJHS wiring, removing and reinstalling interior panels, carpeting, dashboards or other components of your vehicle, please call our toll-free help line 1-800-445-1797 and our in-house technical service team will answer your installation questions. Contact the vehicle's THU\MHJ[\YLY MVY ]LOPJSL ZWLJPÄJ PUZ[Y\J[
Installation 1. Remove the Old Unit from the Dashboard A. Remove the outer trim frame. DIN Front Mount B. Insert the keys supplied with the old unit into both sides of the unit as shown in figure below until they click. Pull to remove the old unit from the dashboard. DO NOT DISCONNECT WIRES AT THIS TIME! 2. Mark Polarity of the Speaker Wires Marking the polarity of the speaker wires will make it easier to connect the existing speakers to the VRVD630.
Installation DIN FRONT-MOUNT (Method A) IMPORTANT! BEFORE THE FINAL INSTALLATION OF THE HEAD UNIT, CONNECT THE WIRING TEMPORARILY, MAKING SURE THE UNIT AND THE SYSTEM WORK PROPERLY. 0UZLY[ ÄUNLYZ PU[V [OL NYVV]L PU [OL MYVU[ of frame to remove it. Insert the keys supplied with the old unit into the grooves on both sides of the old unit. The unit can be installed or removed from the dashboard using these keys. (Fig. 1) Fig.
Installation DIN REAR-MOUNT (Method B) Installation using the screw holes on both sides of the unit. 1. Screw holes on the side of the unit. 2. Screws. Use either truss screws (5 x TT VY Å\ZO Z\YMHJL ZJYL^Z _ TT depending on the shape of the screw holes in the bracket. 3. Vehicle’s Factory Mounting Bracket 4. Dashboard or Console 5. Hook (Remove this part) Note: The mounting sleeve, outer trim ring, and the mounting strap are not used for this method of installation.
Wiring Connections VRVD630 Subwoofer Out Reverse Video In Rear Monitor Out RCA Line Out Rear Front IGNITION MEMORY Right Left Right Left RED (+) YELLOW (+) ORANGE (+) REVERSE LIGHT BROWN (-) PARKING BRAKE Antenn FUSE Connect YELLOW to battery or live + 12 Volts of power BLUE (+) POWER ANTENNA OR AMPLIFIER Negative Ground - BLACK (-) 12 Volt Negative - Front Left Rear Left WHITE + GRAY + WHITE/BLACK - GRAY/BLACK - GREEN + VIOLET + GREEN/BLACK - VIOLET/BLACK - Front Right Rear Righ
Location Of The Controls 1. Power/Back Button 2. Volume Knob 3. Next, Fast Forward/Previous, Fast Reverse 4. Local/Band/Play, Pause 5. Infra Red Window 6. Select/Mode 7. Stereo/AMS/Repeat 8. TFT LCD Display 9. Equalizer Pre-Sets 10. Faceplat Release Button 11. USB Slot 12. AV IN Jack 13. Mute 14. SD Slot 15. Disc Loading Slot 16. Eject Button 17. Reset Button Audio/Video Auxiliary Input The VRVD630 is equipped with an Audio/ Video Auxiliary Input.
Remote Control 1 2 3 4 5 P OWE R MODE DIS P EQ B AC K MUT E S LO W S LO W+ 15 16 17 UP SET ME N T IT L PB 18 U 6 7 8 9 10 11 12 13 E ANG LE G OTO + P LAY 19 C S TOP C LE AR ZOOM P R OG AMS SEEK R PT S E E K+ R DM S UB -T LO C P /N B AND AUDIO ST A V OL 20 21 22 23 24 25 26 27 1. POWER 2. MODE 3. DISP 4. EQ 5. SETUP 6. FAST REVERSE/ FAST FORWARD, PREVIOUS TRACK/ NEXT TRACK, UP/DOWN/LEFT/ RIGHT/ENTER 7. TITLE 8. ANGLE 9. GO TO 10. CLEAR 11. 10+ BUTTON 12. RPT/SEEK- 13.
Remote Control 1. POWER Press to turn the unit ON or OFF. 2. MODE Press the MODE button to change the operating mode of the unit. 3. DISP In DVD mode, press the DISP button to display Title Elapsed, Title Remain, Chapter Elapsed, Chapter Remain, Display Off. In VCD/CD mode, Single Elapsed, Single Remain, Total Elapsed, Total Remain, Display Off. 4. EQ Press to select preset equalizer settings to match the type of music being played. 5.
Basic Operations RESET SWITCH Immediately after installing or connecting power to the unit, it should be initialized. Lower the detachable front panel. Behind the front panel, to the left of the connector, is a small hole with the reset switch in it. With a ball-point pen or other pointed object, press the RESET switch to initialize the unit. 1. PWR/BACK Press the PWR/BACK button to turn the unit ON.
Basic Operations use MONO to improve the sound. ST/ MONO is also available on the faceplate. C. WOOFER In any mode choose WOOFER on the EXPERT menu, the rotate the Volume knob to turn the Subwoofer line out ON or OFF. You T\Z[ OH]L HU HTWSPÄLY PUZ[HSSLK [V KYP]L H subwoofer. D. BEEP In any mode choose BEEP on the EXPERT menu, then rotate the Volume knob to turn the Beep sound ON or Off. E.LOUD In any mode choose LOUD on the EXPERT menu, then rotate the Volume knob to turn the loudness function ON or OFF.
DVD Disc Operations Driving a vehicle while viewing a video on this head unit may violate motor vehicle laws, and may result in serious injury, property damage, or death! To play a DVD the vehcle must be stopped and the parking brake must be engaged. 1. Loading a Disc ing, press the Mode button to enter Video mode. Usually a DVD movie has a menu screen for the viewer to choose from. When the DVD’s menu screen appears use the Arrow buttons on the remote control to navigate through the menu choices.
DVD Disc Operations will change as follows; 1/32, 1/16, 1/8, 1/4 or 1/2 speed. 9. ZOOM During DVD playback, Press the ZOOM Button to increase the picture size. There are 2 size increases, 400% and 1600%. Press the ZOOM button once to increase the picture size 400%, press the ZOOM button twice to increase the picture size 1600%, press the ZOOM Button again to return to normal size. 10.
DVD/VCD Disc Operations 2. Press the ENTER button to select Time Disp., then the menu below will be shown. MENU TITLE ELAPSED TITLE REMAIN CHAPTER ELAPSED CHAPTER REMAIN Bi t r at e 75 TOTAL ELAPSED 0: 19: 50 3. Highlight the Time Display item on the menu you wish to be displayed. 4. Press the ENTER button to confirm your choice. Your choice will be displayed on the bottom right of the GO TO menu. NOTE: This function is operated by using remote control. 12.
USB/SD Card Operations ing will be displayed on the left side of the screen. MP3/MP4/WMA/DIVX Disc Operations 1. Loading a Disc Press the REL button on the top right side of the faceplate to access the disc slot. Insert a disc into the disc slot with the label side facing up. The disc will automatically load. Close the faceplate. 2. Ejecting a Disc Press the REL button on the top right side of the faceplate to access the disc slot. Press the Eject button, then remove the disc.
System Setup System Setup To access the Setup menu, press the Setup button the the remote control. The menu includes; General settings, Audio setup, Video setup, Preferences setup, and Password setup. Use the Arrow ( ) buttons on the remote control to navigate the items available on the menu. Press the Left ( ) arrow button on the remote to return to the previous menu. b) OSD LANGUAGE SETUP Use this menu to select the language displayed on the setup menus and any other on-screen display. 1.
System Setup CH if you have selected the Dolby Digital connection and you would like to enjoy true Dolby Digital surround sound. In this setting, the CENTER, REAR speakers are active. SPDlF OUTPUT MODE: This page is used to set the audio outputs. This DVD player includes three kinds of audio output: 4. Preferences Setup NOTE: The Preferences Setup page is only accessible when there is a disc in the unit, and the disc is stopped. The seting will take effect the next time the unit is powered up.
System Setup SUBTITLE Sets the preferred subtitle language as the default when playing DVD. (ONLY if DVD supports these languages) PREFERENCE PAGE SCREEN TYPE AUDIO SUBTITLE DISC MENU PARENTAL DEFAULT DEFAULT Resets the unit to its original settings. Press ENTER to reset.
System Setup 5. Exit Setup Menu Use the following page to exit the Setup menu.
System Setup Setting the Screen Size The following table shows multi-aspect ratios for different types of DVDs T V S c reen S ize Picture Format on Disc 16: 9 4: 3 Pan Scan Letter-box Wide S c reen 4: 3 16: 9 Functions Supported by DVD Discs There are many different functions available on DVD discs. The Functions vary by player and Manufacturer.
Troubleshooting DVD Playback Symptom Cause Remedy Power doesn't switch ON . The unit doesn't operate.
Troubleshooting DVD Playback Symptom Cause Remedy Playback is not possible The loaded disc has a different region number from this unit Replace the disc with one featuring the same region number as this unit Dialog language (and subtitle language) can not be switched. The DVD playing does not feature multiple language recordings.
Specifications GENERAL Power Requirement ........................................................ 12VDC (10.8~16V) Grounding System ................................................................ 12VDC Negative Fuse........................................................................................................ 15 Amps RMS Power Output ................................................................ 4 X 8 Watts Maximum Power Output .............................................................
Specifications FM TUNER Frequency Range ........................................................ 87.5~107.9MHz Usable Sensitivity ........................................................................ 10dB SN Ratio ................................................................................ 55dB(mono) Distortion ................................................................................ 0.5%(mono) Stereo Separation ................................................
Limited Warranty VIRTUAL REALITY VIDEO LABS® products are designed and manufactured to provide a high level of troublefree performance. VIRTUAL REALITY VIDEO LABS® warrants, to the original purchaser, that its products are free from defects in material and workmanship for 30 days from the date of original purchase, as part of our commitment to product excellence. VIRTUAL REALITY VIDEO LABS® HUK VY P[Z HMÄSPH[LZ YV\[PULS` PTWYV]LZ the designs, materials or production methods of its existing products.
