Owner's Manual

property. Use Channel 9 to render assistance to a motorist.
This is an FCC rule and applies to all CB operators.
7. Microphone socket.
8. Indicators turn on when the function is turned on.
9. S/RF/CAL/SWR: Push to to check RF signal strength, calibration,
and
SWR reading.
10.
CB/PA/WXIWXALT: Press to select CB (Citizens Band), PA (Public
Address),
or WX (Weather). Press and hold to turn WX Alert on
and off.
NOTE: Do not use the PA function unless an external speaker
is connected.
11. MEM/SCAN: Press to start or stop scanning modes [All Channel
Scan (see page 16) and Memory Scan (see page 20)]. Press
and hold to set or clear channel memory while in Memory mode.
12.
9/19/NORM: Press to switch between emergency channel 9,
channel 19, and standard CB channels.
13. Frequency Display: Displays
the MHz of the selected channel. Also
displays menu options.
14.
ANL/NB: Toggles between ANL (Automatic Noise Limiter)
feature and
NB (Noise Blanker) feature. ANL reduces external
noise and
NB reduces interference from vehicle ignition systems.
Each press of the switch cycles through the ON/OFF states as
follows: ANL OFF/NB OFF ➔ ANL ON/NB OFF ➔ ANL OFF/NB ON
➔ ANL ON/NB ON.
15. DAY/NIGHT:Toggles between DAY and NIGHT backlight settings.
DAY or NIGHT displays on the LCD freequency indicator.
16.
RF Gain knob: Improves reception in strong signal areas. Turn the
RF Gain knob counterclockwise to adjust RF Gain down; turn it
clockwise to turn up RF Gain.
9