Owner's Manual

■ LCD COLOR (DAY) - Backlight color
■ LCD CONT (DAY)- LCD Contrast
■ LCD BRIGHT (DAY) - Brightness
■ LCD COLOR (NIGHT) - Backlight color
■ LCD CONT (NIGHT)- LCD Contrast
■ LCD BRIGHT (NIGHT) - Brightness
■ WXSCAN -Weather Scan mode (OFF/ON)
■ BEEP - KEYBEEP (ON/OFF)
Select Backlight Color
1. Press MENU/OK to activate the menus. Continue pressing MENU/
OK until 0-COLO (for day) or N-COLO (for night) displays.
2. Turn Channel Selector to cycle through the seven colors:
NUMBER COLOR
1 Blue
2 Green
3 Cyan
4 Red
5
Magenta
6 Yellow
7
White
NOTE: As you scroll through the available backlight colors, the
LCD changes to that color.
3. Press MENU/OK to select the color. The next menu item displays.
4. Repeat these procedures
to set the NIGHT backlight color.
Set LCD Contrast
1. Press MENU/OK until 0-CONT (Day-Contrast) or N-CONT
(Night-Contrast) displays. The current contrast level displays on
the Channel Indicator (0 - 15).
2. Turn Channel Selector to cycle through the contrast options. The
LCD reflects the contrast options as you cycle through them.
3. Press MENU/OK; the radio stores the brightness level in memory
and the next menu option displays.
21