Owner's Manual

Press and hold CB/PA/WXIWXALT for one second to turn Weather Alert
on. The
WX LED turns on.
MEMORY Mode (MEM MODE)
You can select channels to store into memory and then scan only those
channels.
You can also clear channels from memory.
NOTE: There must be channels saved into
memory in order for
MEM SCAN to work.
Save Channels
Into Memory
1. Tune to a channel in CB mode.
2. Press and hold MEM/SCAN until SA VE appears (about 2
seconds).
3. Release MEM/SCAN.
4. The radio stays on the saved channel.
Scan Channels in
Memory
1. From All Channel Scan mode (see page 16), press MEM/SCAN
until MEM SCAN displays; the radio scans memory channels
only.
2. Press MEM/SCAN again to return to Memory mode or the last
channel scanned.
Listen
to Channels in Memory
1. Press MEM/SCAN until MEM displays.
2. Turn the Channel Selector knob and only saved channels will be
heard.
Clear Channels
from Memory
1. In Memory mode, select a channel.
2. Press and hold MEM/SCAN until CLEAR displays.
3. Release MEM/SCAN. The radio plays the next channel in memory.
MENU Mode
Access menus by pressing MENU/OK The first menu, COLOR, displays.
Turn the Channel Selector knob
to cycle through the other menus:
20