Owner's Manual

NOTE: You can clear channels saved to memory but you
cannot
add any new channels to memory.
3. To exit MEM Tune Scan mode, press PTT, 9/19/NORM, WEATHER,
or CB/PA
MEMScan
1. In CB mode, press MEM/SCAN three times. MEM and SCAN
display and the radio begins scanning upward through the
channels saved to memory.
2. If the radio detects a transmission on one of the channels saved
to memory, it will stop on that channel. To skip the channel the
radio has stopped on, turn Channel Selector clockwise to move
to the next channel or counter-clockwise to move to the previous
channel. The radio continues scanning in
the selected direction.
3. To cancel MEM SCAN mode, press MEM SCAN again or press PTT,
Wireless PTT,
9/19/NORM, CB/PA/WX, or turn VOX on.
NOTE: You can clear channels saved to memory but you
cannot
add any new channels to memory.
vox
In CB mode, press and hold VOX key to enter the VOX menu.
■ VOX Sensitivity
■ Anti VOX level
■ VOX Delay Time
NOTE: The VOX Sensitivity menu opens automatically.
VOX Sensitivity
This menu cordinates VOX microphone sensitivity for VOX transmission. It
senses audio and switches to transmit mode.
1. Press VOX; V-SENS displays in the Frequency Indicator and the
current level displays in the Channel Indicator.
2. Rotate the Selector knob to cycle through the Vox Sensitivity
levels (Level 1
= High Sensitivity through Level 9 = Low
Sensitivity).
17