Owner's Manual

■ Weather
■ Menu
CB Mode
CB mode lets you transmit and receive on up to 40 channels. You can
scan channels (in CB mode and Memory mode) as well as use VOX to
monitor
and adjust transmission quality.
Scan Mode
There are three scanning modes in the RKCBBT:
■ All Channel Scan. The radio scans channels until it receives a signal.
It will move to the next channel
if no signal is received after 3
seconds.
■ Memory (MEM) Mode. Save channels to memory; only those
channels
can be selected by the Channel Selector.
■ Memory Channel Scan. Only channels saved to memory are scanned.
Press MEM/SCAN to scan the modes as follows: CB Mode ➔ MEM Tune
Mode ➔ All Channel Scan Mode ➔ Memory Channel Scan Mode ➔ CB
Mode.
All Channel Scan
1. In CB mode, press MEM/SCAN once. SCAN displays.
2. The radio begins scanning upward through the channels.
•
To skip the channel the radio has stopped on, turn Channel
Selector
clockwise to move to the next channel or counter-
clockwise
to move to the previous channel. The radio
continues scanning in the selected direction.
•
To change to Memory Channel Scan mode, press MEM/SCAN
while in All Channel Scan mode (see page 20).
3. To exit All Channel Scan mode, press PTT, 9/19/NORM, WEATHE~
or CB/PA
MEM Tune Scan
1. In CB mode, press MEM/SCANtwice MEM displays.
2. Use the SELECTOR knob to scroll through channels saved to memory.
16