User manual

Charging the Camera
09
RIDE
Whenever the camera is connected to an external power supply, either an external
battery, a car accessory socket, a USB mains charger or a computer, the camera will
start to charge its internal battery. The RED LED will blink when charging and go
GREEN when it is fully charged.
You can also use many modern USB phone chargers to charge the battery inside the
RoadHawk RIDE camera.
A full charge from flat will take 2 to 3 hours. It is not possible to over-charge the battery
in this camera.
* When you connect the camera to a power source to charge the internal battery, the
camera will turn on and start recording. You can turn the camera off by pressing and
holding the silver power button. When connecting to a computer, the camera will
charge but will not start recording automatically.
The camera will charge quicker if it is not recording.
Charging the Camera