User manual

Installing the Camera

1: Experiment with the camera and make sure you know where you want to mount

it before sticking the adhesive mount in place. Once it is stuck down, it is not easy to

move again.

2: Ensure the area you wish to place the adhesive mount is fully clean and dry.

3: Peal back the red adhesive tape from the mount and place it firmly in to position.

4: Allow the mount to bond for at least 1 hour before use.

5: Slide the camera in to the adhesive mount and lock it in place.

6: Hold the camera with your hand and move it around to make sure it is

fully stuck down and in to place.