User's Manual

Product list
③
Stand
1
④
Screws for the stand
4
⑤
Allen wrench
1
⑥
RDT500B power supply and CAN extension cord
1
⑦
Instruction
1
⑧
RDT500B turn signal cord
1
⑨
GPS antenna (option)
1
3 Specification and Function
3.1 Active safety Function
Alarm type
Description
Voice prompt
Fatigue warning
(level 1)
When the driver is found to be sleepy,
exceeding the level-1 warning threshold, an
alarm will be raised.
"Toot~ toot~ toot~"
Fatigue warning
(level 2)
When the driver is found to be sleepy,
exceeding the level-2 warning threshold, an
alarm will be raised.
"Toot, toot, toot,
toot, attention
please"
Obstruction
When an obstruction covering the camera for
monitoring the driver's condition over the set
time, an obstruction warning will issued.
"Dang~dang~"
Leaving the post
When the driver deviates from the driving
position and the driver's face cannot be detected
by the device, an alarm will be raised.
"Dang~dang~"
Distraction prompt
When the driver is distracted from the road
ahead, such as looking up, looking down and
looking around, an alarm will be raised.
"Watch out road
conditions ahead"
Smoking
When the driver smokes while driving, an
alarm will be raised.
"No smoking"
Make a phone call
When the driver makes a call while driving, an
alarm will be raised.
"Drive carefully"
Yawn
When the driver yawns while driving, an alarm
will be raised.
"You are sleepy.
Take a rest please"
Substitution prompt
After the vehicle moves and reaches the set
speed, the driver's identity will be monitored. If
the driver change is detected, a voice prompt
will be made.
"Driver has
changed"
When RD-CAM-AD500 or RD-CAM-AD501 is equipped, the system can achieve active