User's Manual

ManualsBrandsRoadefend Intelligence Technology ManualsElectronicsActive Safety Intelligent Control System

DT500B Active Safety Intelligent Control System User Manual

1 System Introduction

RDT500B is an active safety intelligent control system developed on the basis of the image

recognition algorithm, which integrates driver status early-warning analysis and forward active

safety warning with a main function of safety drive assistant, so as to avoid road accidents caused

by poor driver status or improper operation. As split design is applied in the product, different

camera solutions can be selected according to the vehicle models. The product can communicate

with the platform independently and can also be used with other on-board terminals through ethernet

to provide a complete set of solutions for vehicle active safety control.

Fully considering the requirements of active safety terminals proposed by JT/T 883, JT/T

26773, JT/T 794, JT/T 1076, TJSATL13-2017 and other standards in designing the product has not

only ensured the product conforming to the requirement, but also enhanced the stability,

compatibility and maintainability of the system.

1.1 System diagram

Product model

Product name

Note

System

components

RDT500B

Active safety intelligent control system

RD-CAM-AD500

ADAS camera for road ahead

Bottom outlet

RD-CAM-AD501

ADAS camera for road ahead

Top outlet

Note 1: Since RD-CAM-AD500 and RD-CAM-AD501 have different outlet modes, which can be selected according

to different models and different installation methods.

Summary of content (7 pages)

PAGE 1
DT500B Active Safety Intelligent Control System User Manual 1 System Introduction RDT500B is an active safety intelligent control system developed on the basis of the image recognition algorithm, which integrates driver status early-warning analysis and forward active safety warning with a main function of safety drive assistant, so as to avoid road accidents caused by poor driver status or improper operation.
PAGE 2
1.2 Introduction of system components 1) RDT500B Integrating the camera for analyzing driver status, RDT500B is acted as an operation processing center of the whole system to calculate the high-definition digital video information input by the forward road surveillance camera. RDT500B appearance 2) RD-CAM-AD500 / RD-CAM-AD501 The RD-CAM-AD500 is an ADAS camera for road ahead, which is targeted road in front to monitor the road ahead.
PAGE 3
Product list ③ Stand 1 ④ Screws for the stand 4 ⑤ Allen wrench 1 ⑥ RDT500B power supply and CAN extension cord 1 ⑦ Instruction 1 ⑧ RDT500B turn signal cord 1 ⑨ GPS antenna (option) 1 3 Specification and Function 3.1 Active safety Function Alarm type Description Voice prompt Fatigue warning (level 1) When the driver is found to be sleepy, exceeding the level-1 warning threshold, an alarm will be raised.
PAGE 4
safety warning in the forward direction Alarm type Description Voice prompt Forward collision warning When the vehicle speed exceeds the set speed, and the collision time with the preceding vehicle is lower than the safety time threshold, an alarm will be raised. "Toot, toot, toot, toot, toot~" Low speed collision warning When the vehicle speed is less than the set speed, and the collision time with the preceding vehicle is lower than the safety time threshold, an alarm will be raised.
PAGE 5
time will be recorded by the device. Information acquisition is conducted to the device through the butted in-vehicle equipment. Meanwhile, information interaction can be shared between the 4G network and the cloud platform through the in-vehicle equipment. 4) Driving video recording Simultaneous recording of two cameras is supported by the device. What's more, time, positioning, speed and other information can be overlaid on the video.
PAGE 6
4 Product specifications Basic Information Basic Information operating temperature(℃) -25~70 storage temperature (℃) -40~85 operating humidity(%) 0~90 operating voltage(V) 9~36 rated power(W) 8 CAN support Ethernet support WIFI support TF card support Micro USB support Serial port RS232 4G/GPS support 5 User Notes 1. The product as an active safety assistant driving device cannot replace safe driving and conscious driving. Please drive safely in accordance with the traffic rules.
PAGE 7
-- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.