User's Manual

29
9.3.4.
Set ”display linkage” and “mirror and flip”
According to the actual project requirements, click "setting - VIDEO - display linkage" or "setting - VIDEO -
mirror and flip".You can set the “display linkage” function or mirror / flip the video of any channel
9.4. A
LGORITHM
S
ETTING
9.4.1.
ADAS calibration
Click“Algorithm Setting”，Enter the algorithm configuration page to calibrate ADAS camera
（1）Distant skyline calibration
Drive the vehicle to the center of the long straight horizontal lane and ensure that the vehicle stops straight.
Adjust the ADAS camera handle until the horizontal line of the picture coincides with the distant horizon .
The ground and sky account for half of the picture, as shown in the following figure; Use a tape measure to
measure the height of the camera from the ground, the distance of the camera from the center line, the
width of the vehicle, and the distance from the camera to the front bumper, modify the parameters
according to the actual situation, click the Save button, and exit after hearing the "calibration completed"
language prompt
（2）Use the calibration rod to calibrate
Center