User's Manual

20
camera angle through the universal ball shaft until the driver's face is in the center of the display and occupies about 1/3 of the
screen, as shown in
Figure 9
below.
Figure 8
：
DMS Camera fixing
Figure 9
：
Driver position of DMS Camera
8.2.3.
Precautions
Since the camera is installed above the center console, it is necessary to ensure that the installation will not
affect the driver's driving vision. The wiring of the device should try to ensure that the dark wire is used to
ensure that the operation console is clean and beautiful. The exposed harness needs to be protected by
corrugated pipe to prevent damage during later use.