User's Manual
Table Of Contents
- Safety Instructions
- Installation Precautions
- 1.PRODUCT INTRODUCTION
- 2.PRODUCT FEATURES
- 3.APPEARANCE DESCRIPTION
- 4.PRODUCT CONFIGURATION LIST
- 5.PRODUCT FUNCTION OVERVIEW
- 6.INSTALLATION PREPARATION
- 7.LIST OF INSTALLATION TOOLS
- 8.INSTALLATION GUIDANCE AND PRECAUTIONS
- 9.USE OF WEB APP CONFIGURATION TOOLS
- 10.USER NOTICE
16
8
Insulating black tape
Used for binding thread
9
tie-wraps
7cm long, used to fix the harness
10
Adhesive tape
It is used to fix the DMS bracket when
the hole cannot be punched
11
Electric screwdriver
Professional Electric screwdriver, with
a drill diameter of 3cm, is used to fix
screws and make holes when walking
dark lines
8. INSTALLATION GUIDANCE AND PRECAUTIONS
8.1. I
NSTALL
T
HE
C
ONTROLLER
8.1.1.
Wiring Harness
First, find the vehicle power harness (VIN), vehicle ignition switch harness (ACC), ground harness (GND), speed signal
harness, left and right turn signal harness of the vehicle. The corresponding harness can usually be found in the fuse box
of vehicle. As shown in the pictures below: