User`s manual

8
Insert SDHC Memory Card
Insert your SDHC memory card to the rear of driving recorder (refer photo below).
Adjust suction mount
Charging your driving recorder
No pre-charge needed. Connect the car charger that comes with the package, between the
Road Mate DVR driving recorder and your vehicle cigarette lighter. Using a different type of
adapter or car charger can result in malfunctions and/or possible fire hazard due to battery
overheating.
For safety reasons, the battery in your Road Mate DVR driving recorder will stop charging
when the ambient temperature is less than 32 °F (0° C) or more than 158°F (70° C).
To obtain a fully charged battery, it is recommended that you charge the battery initially for
at least 2 hours. Estimated usage of the Road Mate DVR driving recorder on battery power
is approximately 90 minutes.
When connecting to and using a household power outlet, use only AC/DC Adapter (rated
input: 100~240V AC, 50/60 Hz, rated output: 5V, 1A DC). Using anything else can cause
fire, overheating, or electrical shock.