User`s manual

For your safety, avoid routing the cable from shifters, pedals, accessory controls, and

do not place the suction mount near airbags deployment zone or where it will obstruct your

view.

Route the car charger cable and connecting power.

 Plug the car charger into your vehicle power receptacle (cigarette lighter socket), and connect

the USB connector to the driving recorder USB port. Route the car charger power cord along

the windshield edge. Be sure to stay away from the side air bags shifters, pedals, accessory

controls and other control mechanisms.

Note: If the car charger power-on indicator is ON, it means the power is being supplied to the

driving recorder. Otherwise, check the cable connection to the vehicle power receptacle. If the

power-on indicator remains OFF, please turn your vehicle to ignition position.

Starts car engine and get recording.

Start your car engine- the Road Mate DVR driving recorder will automatically turn on by itself.

Note: Some of vehicles apply power to the power receptacle only when the ignition is ON. If

your cigarette lighter socket is always powered on, the Auto power on/off feature will not

function.

Safety Precautions

Follow all safety guidelines for operating your device. Failure to practice safe usage of this

device while driving may result in damage, injury, or death. Road Mate DVR is not responsible

for any damages caused to your car, your device, or yourself due to the installation or use of

this pedestal mount.