Troubleshooting guide

71
E. THE ROLLUP DOOR
Both types of Funmover, either with a liftgate or loading ramps will have a rollup
door. As with all other moving parts, please use with caution.
1. To open the rollup door, rotate the lock release handle counter clockwise until
it clears the right side of the main handle.
2. Lift the main handle and rotate it counter clockwise until it is fully opened and
engages the spring-loaded release latch to the left of the handle.
3. While holding the strap to the right of the main handle, open the door. Using
this strap will prevent the door from rolling past it’s proper open position.
4. Close in just the opposite manner.
F. SECURING YOUR CARGO
The Funmover is equipped with various devices for securing cargo. It is
extremely important for both the safety of your equipment and for the Funmover
that all equipment stowed in the cargo hold is properly secured.
Devices that can be used for tying down and securing are the tie-down ring clips,
tie-down straps, and the flip-up wheel chocs.
Other items such as helmets, tools, toolboxes, jacks, etc. should be stored in the
overhead compartments or tied down.
G. CARBON MONOXIDE DETECTOR
For your safety, the Funmover cargo area comes equipped with a carbon
monoxide detector. It works the same as the detector in a regular motorhome
cabin by detecting the presence of carbon monoxide. If it detects an unsafe level
of carbon monoxide, it will sound.
If you should hear this alarm go off, stop the vehicle if you are in motion, turn the
motor off and open the all doors and windows, both in the drivers cabin and in the
cargo area to ventilate.