User Manual

5
Some refrigerators, freezers, pumps and other similar equipment and appliances
made and that the power source is fully charged. Then, follow step by step
range. Turn inverter switch OFF, ON, OFF, and ON again in quick succession. If
unsuccessful, it is likely that the inverter model does not have the required start up
INSTALLATION
2. Cables. Make sure to use the correct cables. A chart is provided below, for your
reference:
150W 15A
300W 30A
2.5mm²
6.0mm²
600W 60A
1500W 150A
12.0 or 16.0mm²
25.0mm²
3. Grounding. Connect Chassis Ground Terminal Lug to earth ground or vehicle
chassis using 10.0mm² wire.