User Manual

RND 315-00009, RND 315-00010, 315-00015 — AC-DC DIN RAIL MOUNTED POWER SUPPLY
2 3
PRODUCT SPECIFICATION
din rail power supply
AC-DC Din Rail Mountable Power Supply
IS-120 SERIES, SINGLE PHASE INPUT
Features
Applications
Electrical
Universal Input 90~264Vac
100% Full Load Burn-in Test
Cooling by Free Air Convection
All Round Protections: Short Circuit, Over Voltage,
Over Current, Over Temperature
LED Indicator for DC Power On
LED Indicator for DC Low
IS
-
24
120
Series Name
Output Voltage(VDC)
Output Power(W)
www.pairuigroup.com
Page:1/17
PAIRUI ELECTRONICS
Updated 2016-V1.0-1207
Electrical
PRODUCT SPECIFICATION
Part Number
Nominal
Input Voltage
Output
Voltage
Output
Current
Ripple
(Max.)
Efficiency
(Typ.)
Certificate
IS120-12 100
-240VAC 12V 8A 100mV 82% CE, FCC, CB, UL, CUL
IS120-24 100
-240VAC 24V 5A 120mV 85% CE, FCC, CB, UL, CUL
IS120-48 100-240VAC 48V 2.5A 240mV 86% CE, FCC, CB, UL, CUL
NOTE:
1. The ripple values are measured at 20MHz of bandwidth by using a 12'' twisted pair-wire termin-
ated with 0.1uF & 47uF parallel capacitor under ambient temperature 25℃ at rated input voltage and
rated load;
2. The efficiency values are measured under ambient temperature 25℃ at rated input voltage and rat-
ed load.
din rail power supply
www.pairuigroup.com
Page:2/17
PAIRUI ELECTRONICS
Updated 2016-V1.0-1207
SINGLE PHASE INPUT
RND 315-00009
RND 315-00010
INPUT
PARAMETER CONDITIONS MIN TYP MAX UNITS
Input voltage 90 264 Vac
Input frequency 47 63 Hz
Input current
Full load, Vin=115Vac
Full load, Vin=230Vac
2.6
1.3
A
A
Inrush current
Cold start, Vin=115Vac
Cold start, Vin=230Vac
30
60
A
A
1. This product is built in inrush limiting circuit to protect the circuit
from surge current damages when the power is turned on. Malfunction
can occur by repeating the input voltage on and off rapidly. Therefore,
sufficient interval should be given between turning on and off the
power;
2. To avoid connecting the switc
h or fuse to input terminal(outside of
the power supply), more consideration should be given when selecting
the parts that can endure the inrush current
Stand-by power consumption Vin=230Vac 4 W
Surge voltage L-N 2 KV
PRODUCT SPECIFICATION
din rail power supply
www.pairuigroup.com
Page:3/17
PAIRUI ELECTRONICS
Updated 2016-V1.0-1207
RND 315-00015
160-240VAC
48V 2.5A
240mV
86%
CE, UL
CE, UL
CE, UL