Datasheet

ManualsBrandsRND Power ManualsBatteries and ChargersPrimary Battery, Alkaline, D, 1.5V, Ultra Power, Pack of 10 pieces

Alkaline Battery 1.5V D

RND is a trademark of Distrelec

1. Scope:

This specification is applicable to RND alkaline cell, LR20 Super (Mercury & Cadmium &Lead Free) distributed by

RND.

2. Law & Regulation Compliances:

This product complies with EU’s battery directive (2013/56/EU).

Packaging materials comply with EU’s directive on packaging materials and waste (94/62/EC)

3. General:

3.1 Type designation

IEC/ JIS LR20

ANSI 13A

Common D

3.2 Chemical system: Zn/KOH-H

O/MnO

3.3 Nominal voltage: 1.5 V

3.4 Weight: Approximate 140 g

3.5 Dimension (mm)

The dimensions shall be in accordance with the below figures both prior to and after service output test.

Measuring equipment shall be with an accuracy ±0.05mm at least.

/ min max

Φ 33.0 34.0

A 59.6 61.0

C 18 -

F - 9.5

G 1.5 -

3.6 Capacity: Approximate 18000mAh (25mA, 24h/d, 20±2℃, e.v.= 0.8V)

3.7 Operation temperature

: -18℃~50℃

Recommend storage temperature

: Not exceed 30℃

3.8 Heavy Metal Contents: Hg ≤1 ppm, Cd≤20ppm, Pb≤40ppm

Summary of content (4 pages)

PAGE 1
Alkaline Battery 1.5V D 1. Scope: This specification is applicable to RND alkaline cell, LR20 Super (Mercury & Cadmium &Lead Free) distributed by RND. 2. Law & Regulation Compliances: This product complies with EU’s battery directive (2013/56/EU). Packaging materials comply with EU’s directive on packaging materials and waste (94/62/EC) 3. General: 3.1 Type designation IEC/ JIS ANSI Common LR20 13A D 3.2 Chemical system: Zn/KOH-H2O/MnO2 3.3 Nominal voltage: 1.5 V 3.4 Weight: Approximate 140 g 3.
PAGE 2
Alkaline Battery 1.5V D 4. Electrical Characteristics Unless otherwise stated, all measurements are to be performed at a Standard Environment of 20 ± 2°C 55 ± 20% RH. All samples are normalized for 8 hours at least at the above environment prior to measurement. The digital voltmeter (DCM) is with the precision of 1mV (internal resistance not less than 1 Megohm). The load resistance of the total circuit is accurate within ±0.5% of the specified value. 4.
PAGE 3
Alkaline Battery 1.5V D 6. Security Characteristics 6.1 User Drop Test This test simulates the situation when a battery is accidentally dropped. Test conditions: Undischarged test batteries shall be dropped from a height of 1 m onto a concrete surface. Each test battery shall be dropped six times, twice in each of the three axes. The test batteries shall be stored for 1 h afterwards. Number of test sets: 5 batteries Requirement: No fire, No explosion. 6.
PAGE 4
Alkaline Battery 1.5V D 9. Component / Information of Ingredients Chemical Nature: Alkaline zinc-manganese dioxide batteries CAS NO. MATERIALS APPROXIMATE PERCENT OF TOTAL WEIGHT (%) CAS NO. ~41.5 1313-13-9 Brass ~1.3 12597-71-6 ~16.5 7440-66-6 Fe ~15.0 7439-89-6 Water (H2O) ~11.5 7732-18-5 Ni-plating ~0.18 7440-02-0 Potassium Hydroxide (KOH) ~7.2 1310-58-3 Bi <0.005 7440-69-9 Carbon ~2.5 7782-42-5 In <0.