Datasheet

Rechargeable Battery AA / HR6
1. Scope:
This specification is applicable to RND 305-00022 Nickel-Metal Hydride Cylindrical Cell.
2. Law & Regulation Compliances:
Packaging materials comply with EU’s directive on packaging materials and waste (94/62/EC)
3. General:
3.1 Chemical system: Ni /KOH-H2O/ MH
3.2 Nominal voltage: 1.2 V
3.3 Weight: Approximate 27g
3.4 Dimension (mm) :
/ min max
Φ 13.7 14.5
A 49.5 50.5
4. Electrical Characteristics:
Unless otherwise stated, all measurements are to be performed at a Standard
Environment of
20 ± 2°C
55± 20%RH.
All samples are normalized for 8 hours at
least at the above environment prior to measurement.
The digital voltmeter (DCM) is with the precision of 1mV (internal resistance not less than 1 Megohm). Notes: Standard
Charge/Discharge Condition:
Charge: 0.1C
5
mA × 16hrs Discharge: 0.2C
5
mA to 1.0V/cell
e.g. HR6 20: Charge: 200mA × 16hrs Discharge: 400mA to 1.0V/cell
3.5 Norminal Capacity: 2000mAh
Remark: Discharged at 0.2C
5
, 24h/d, 20±5℃, e.v.= 1.0V
3.6 Operation temperature:
: Charge 0℃~45℃, Discharge -20℃~60℃
Recommend storage temperature
: -20℃~ 35℃
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com